Thursday, December 21, 2006


Technical skills training at Upper Alunied Technical School.

A well maintained car is like buying insurance for your cars, which give you years of satisfying driving experiences and safe you thousands of dollars and troubles.

Making machinery running most efficiently with the least effort, is the constant thoughts of innovators/inventors since centuries, people had been trying to find ways to make the wheels turn eternally or the most efficiently.

The recent survey found that the wheels are a more important invention than computers.
As you know got great difficulties riding a tricycle in my youth. Because of this difficulties, the motivation to find a way to solve these problems is very strong.

So how to make the machinery run the most efficiently is my constant thought. I had work in two major corporations for more than ten years.

When I was a few years old, I started to repair and maintains his bike using various chemicals. I regularly dismantled all the parts of my bike and put it back after he cleaned and lubricated it.

I learned to repair my bike from the old bicycle repairman, who repairs bicycles at made a shift tricycle stall near the roadside at Circuit Road.

When I when to work in a company I found that the machinery was not well maintained

Normally usually people don't use the right chemicals

A well maintained machinery can last longer, less down time or stoppages reduced wastage, use less energy, which is environment friendly, reduce the lost of man hours, run faster, cut cost & improve the overall quality of the end products.

With less energy to run the machinery, the environment become better. Nowaday with high energy price. Energy efficiency is very important

So these cycles are usually inter-related

As a result it improve the company performances and reduce the wastage and resources. With every increment of improvements in productions millions of units as were produce regularly. How much savings and redeployments of resources if you multiply by the units and years.

These are the secrets why the two companies I worked able multiple their earning a few folds

So I set my mind on how to made the machines run the most efficient way

I had discovered the real reasons behind why the breakdown of machinery

Most machinery after sometimes were clogged up because of the grease that attract foreign particles which stick on the ball bearings if more grease is add to it it attract more foreign particles and its only temporary solve the problems. Some might not know of these facts Understand the principle is important.

After I set and apply the chemical the machinery usually from the beginning to the end run with little problems

The alignments were out because the mechanics are usually with little educations, had difficulties in maintaining it and understand the real problems.

To solve the problems a special chemicals need to use to remove the foreign particles or chemicals before applying special lubricants.

And them set back the moving parts correctly is very important- through my years of experiences in working with machinery

The system of maintain the machinery which I had developed had help the two major corporations, I work in saving millions or dollars and improve their bottom line through my discovery.

A simple experiment can prove his point.


The better question is how to cycle a bicycle with the least effort.

A few factors affect the smooth running of a bike. At heart of the wheel, which the ball-bearings were support by two nuts from both sides, the nuts should not set too tight, too tight the bike difficult to move, too loose the wheel wobble.

The ball-bearings needed to spray with the aerosol base chemical to neutralise the negative effects of foreign materials and deposits a thin film on the surface. It needed to spray regularly

The rim the spokes from both sides need to be set so that when it turn, it won't till too much to one side and not wobbling.

And spreading of special lubricants on all the moving parts.

It's the same principles whether apply to cars or printing machines.

If done properly the machinery will run in tip top conditions, with the least amount of energy.

To test the principles.

When a bicycle is not maintain for a certain periods of times. The wheels is much more difficult to move

The bicycle repair shop will use a U- shaped device to check the alignment of the rim and use a small wrench to adjusted the tensions of spokes of rim, back to its shape and adjusts the nuts of the shafts of the wheel accordingly and lubricate it.

After that when he turn the wheels it seems like the wheel can turn perpetually with little effort. If the settings done at its best.

It runs much faster and longer.

That's why I can ride my inexpensive bike with only one leg and without using his hands to hold the handlebar, long distances and navigate obstacles just like a normal persons riding a bike normally. See photos of amazing bicycles feats, click recordbreaking feats

Hope that more people use bicycles as their mode of transport, because of today rising oil price, it's good to the health and environmental friendly.

What's your feedback?

1 comment:

HecticbutHappy said...

It's kind of funny where people get the inspiration to succeed in life. I wonder if he had any idea when he was having trouble with his tricycle how far his curiosity would take him. Interesting post.

The secrets of two iconic companies' success

This is the true story of a person life's endeavors